Axxess ASWC Manuel d'installation télécharger pdf (Page 10)

axxessinterface.com 800.221.0932

10)After4secondsoftheledashingquicklytheledwillgooutfor2seconds.

11)Thentheledwillash,upto9times,dependingonwhatradiotheASWCthinksit’sconnectedto.

Here are the led blinks and which radio they represent:

1stledashisforEclipse

2ndledashisforKenwood

3rdledashisforClarion

4thledashisforSonyandDual

5thledashisforJVC

6thledashisforPioneerandJensen

7thledashisforAlpine*

8thledashisforVisteon

9thledashisforValor

*Note:IftheASWCashes7timesandyoudonothaveanAlpineradioconnectedtoitthatmeans

that the ASWC did not see any radio connected. Verify the 3.5mm connector is connected to the

SWC input on the radio.

12)Makesurethenumberofashesmatchwhatradioyouhaveinstalled.

13)IftheledashesmatchtheradiothenholddowntheVolumeDownbuttonuntiltheledgoessolid

red.

14) Programming for the vehicle and the radio is now complete. Test out the steering wheel control

functions to make sure it works correctly.

Iftheledashesdonotmatchtheradioyouhaveconnected,youmustmanuallyprogramtheASWC

to tell it what radio it is connected to.

1) To manually program the aftermarket radio, press and hold the Volume Up button on the steering

wheel control until the led goes solid red, then release Volume Up.

2) At this point Eclipse is programmed.

If you are using an Eclipse radio go to step 3.

If you are using a different radio go to step 4.

3)PressandholdVolumeDownfor5seconds.Theledwillashoncethengosolidredindicatingthe

programminghasnished.Goenjoyyourradio.

1 2 ... 5 6 7 8 9 10 11 12 13

Pas de commentaire

Axxess ASWC Manuel d'installation Page 10